Stair tread adhesive CARBO TREP 3.5kg

CARBO TREP is a flexible, solvent-free, non-sag 2-component polyurethane reactive adhesive for bonding risers and stair platforms on dry substrates such as concrete, cement, screeds, plaster, metal, gypsum, ceramics, chipboard, wood, and rubber.

It must be ensured that the sub floor is ready for installation by performing proper sub floor preparation, floors must be clean, have sufficient surface strength, must be level, permanently dry and free of cracks. If necessary, make sure sub floors are level, have sufficient absorptive capacity and grip. Then apply adhesive to sub floor, avoid adhesive pooling and excessive layer thickness by evenly raking the notched trowel over adhesive layer. The element to be bonded is then placed on top. Any CARBO TREP adhesive that squeezes out of gaps and seams must be removed immediately. In cold weather, the adhesive should be brought to a warm place in time to reach the proper application temperature. Please test the effect of the cleaner on the finish of the wood flooring in an inconspicuous area or on a sample prior to applying the cleaner. Hardened adhesive residues can easily be removed mechanically, mostly residue-free. However, longer exposures on finished wood flooring should be avoided to prevent possible contouring. After 24–48 hours, the adhesive has hardened to form a tough, permanently elastic, and hydrolysis-resistant bond that absorbs and relieves tension. The curing time is delayed at low temperatures (15 °C).

Other information: The foregoing representations are based on the results of our most current product and material testing and are of a non-obligatory advisory nature only since we have no control over the actual quality of workmanship, materials used and worksite conditions. As such, they do not constitute an express or implied warranty of any kind. The same applies to our commercial and technical consultation services which are provided free-of-charge and without obligation. Therefore, we strongly recommend that prior on-site testing be conducted to observe and study the suitability of the product for the intended purpose. With the release of this technical information, all prior technical information (technical data sheets, installation recommendations and other information regarding similar purposes) becomes invalid.